Відео

You make it look so easy.

Hi Sparky, in a real life situation, there will be 3 switches at 3 different locations of the house, mine is the 4 way switch at upstairs. So do I have to first LOCATE the 3 circuit breakers and then turn all of them OFF? Before taking all the wires out and then do the testing? Thanks a million. Best video explaining the

To use with 7-strand cables, does it have to be "twisted" before inserting it into the connectors? Or do I just strip the cable and insert it that way?

What is this some sort of Electrical Installation competition?? As I was typing this I heard people chearing then someone announced "30 minutes left". So I'm gonna guess it is, but what exactly is this?

Great video and yes, I’m late to comment but I wasn’t an electrician back then. My question is…how do you determine that the shrinkage is 3/16 and not 1/4, or 3/8, or 1/2”. Please and thank you.

Have not seen any videos from you sir lately , hope all is well sir , god bless

So how yu connect the two wires….?! Are you going to use two ground camps

Just love this channel. Great info!

All 6 are showing hot unhooked?

My light getting power but my fan isn’t still 😢

Thank you for the vid!

At 1st i wasnt going to finish because of the much speaking but i really like his style!

thank you. i learned more from you then any other videos

Where did the plug for the dishwasher go

Just what I need thanks for the review 👍🏼

Nice

Worked like a charm, Ty sir.

Phenomenal video. I'm about to add a second switch exactly like this to control an existing light from two separate rooms and this video has sured up my confidence in getting the job done correctly. Thanks!

Awesome, thanks Sparky! Good information and thanks for sharing!

Nice. A well needed feature is it being manufactured to lean against a wall. That's what I need.

"THANK YOU" Sparky Channel. I had an issue with my 3-way hall way configuration so I decided to get help from UA-cam and this video is the BEST of all videos relating to this topic. Your method of troubleshooting was just fantastic and I got my issue corrected.😀😀😀

Another great video !

Awesome review!!! Thankful for people like you that take the time to inform us before we make purchases!!

How tf do you take off the new one please

I’ve been through 3 of these and waiting on a fourth. I just changed out all 3 elements in my last one and water heats up then goes cold. It I limit the flow it may stay hot but not to correct set temp. Service was less than helpful other then to tell me it’s most likely out of warranty and to buy another. But while I wait for the new one I’d like to finish trouble shooting this one. Fuse is good all connections are good, and all three chambers are heating

Very helpful video! Will the 3057 one work?

I like the alligator because I can lock it in the vise to sharpen the teeth.

You are incorrect regarding the strap, sir. NEC 358.30 requires EMT to be strapped(secured) WITHIN 3 feet of a box or enclosure not 3 feet AWAY from the box. The old "no strap" rule for nipples was for sections of raceway 18 inches or less and was removed from the NEC in 2011. There are NO exceptions in that remove the requirement to strap conduit or nipples within 3 feet of a box or enclosure.

I have a homeline plug in neutral being used as a main panel. No ground bar came with new panel. It is my understanding my grounds can be installed on the neutral bonded panel bar. I must have only one neutral per terminal. Is this correct, or do I need to go purchase a separate ground bar. Thank you for all your videos

4 years later and I found this extremely well explained example!!! Congratulations!

Bought one today, had a CBLDD M18 before but that one was too strong. This one is perfect!!! Very precise on lower torque! It sits quite weird in the hand though. Its very "fat"!

Good to see those WAGO connectors!

Exactly what i needed to know! Short and right to the point, well done!

Thank you 🙏🏼

Very helpful that you.

I have those same wires, except 3. How do I tell which is neutral and which is ground??? TY

Great video sir!!!

How to remove the quick load spool head

Does this also work for metal roofs?

I held the base as tight as I could and the other part still won't spin!!!

Be careful with that Milwaukee on live terminals. The manual says not to use on live circuits. And don't be fooled about quality just because a company is German, for a fact many top German brands (Knipex etc.) job out tons of work to Taiwan / China etc. and even rebrand tons of Taiwanese designed and mfged tools shown in their catalogs (that you can buy the exact same tool under a different brand name for less - look through catalog & you will clearly see especially in wire stripping tools). And btw that Whia is only accurate to -/+ 6%. My ratcheting in. lb. Tekton is accurate to -/+ 4% and is 1/4 the cost. The Whia also can not be calibrated, you have to send it in and they sell you a new handle + shipping - (fact, just call them).

at 10:30, How can i connect the neutral wire when the switch requires neutral wire connected?

Amazing review! Best I’ve seen on UA-cam, thank you for a very real and honest review

Im in school for general electrician and this helped a ton, thank you, sir!

Great video and explanation. Thank you. 😃👍

Thank you

What happens if the Kohler ATS transfers the grounded conductor rather than passes through? No what is the answer?

Hey Sparky, you still got it😂 Thank you, thank you, thank you.

Bill. Do you have a video that discusses installation/code requirements of receptacles in attics for small video camera transformers.

How do you align the 2 lines when doing a 90. How do you get the exact measurements. Do you need that piece of white paper behind?